Home

Can we help? Contact us
(60) 19 333 9484

 

WS2 Compact

Working Diameters
With Standard Equipment
IN-LINE BORING
Starting from ø 42 mm to over ø 400 mm

OVERLAY WELDING
Internal– from ø 25 mm to over ø 400 mm
External- from ø 20 mm to over ø 400 mm
Drilling – from ø 5mm to max ø 45 mm
Tapping – from ø 8mm to max ø 45 mm
with presetting for Tapping

Accessory kits
KIT 20
For in line boring starting from ø 22mm to ø 45mm

KIT 30
For in line boring starting from ø 32mm to ø 60mm

KIT 2000 from ø 45mm to ø 400mm
For facing bosses, creating circlip grooves, external machines.

Upon request, we can supply:
• Personalized kits for specific machining or applications.

Photo Gallery


WS2 Compact



Video gallery application
Drilling - WS2 Compact
Set-Up: In line borning
Set-Up: Overlay welding
Set-Up: Centering

Machine Size


 
 Technical Characteristics
The machine is equipped with an electronic control panel with diagnostic display
TOOL HOLDER SHAFT DIAMETER mm 40   ( 1,57 in )
TOOL HOLDER SHAFT LENGTH mm 2600 usable mm (N° 3 connectable bars (1000mm+1000mm+730mm)
BORING DIAMETER mm 22 - 400   ( 0,87 in - 15,75 in )
WELDING  DIAMETER mm 25 - 400   ( 0,98 in - 15,75 in )
WELDING TECHNOLOGY   SPIRAL (CONTINUOUS WITH VARIABLE STEP)
LONGITUDINAL STROKE mm UNLIMITED WITH STEP OF 120 mm (4,72 in)
ROTATION MOTOR mm C/C (CE COMPLIANT)
FEED MOTOR mm C/C (CE COMPLIANT)
FEED SYSTEM mm ELECTRIC-MECHANICAL
OUTPUT TORQUE AT THE BAR mm 290 Nm (266 Rpm)
MAX ROTATION SPEED rpm 266
FEED RATE mm/rpm 0 - 0,5 ( 0 – 0,02 in / rev )
MAX FEED SPEED(w/rapid button) mm/min 285
REMOVAL MATERIAL cm³/min 23
DRIVE UNIT WEIGHT kg 27


 

 Standard Equipment
N°1 DRIVE UNIT 
N° 1 CONTROL PANEL
N° 1 CABLE FOR CONTROL PANEL
N° 1 CONTROL PANEL HOLDER
N°3 CONNECTABLE TOOL-HOLDER SHAFTS Ø 40 MM lgth 1000 mm + 1000 mm + 730 mm:Tot. Usable lgth 2600 mm
N°4 BEARING CARRIERS
N° 1 FLANGE FOR REDUCED SPACES

N°24 BRACKETS FOR ADJUSTING DIAMETERS (N° 12 X 50 MM, N° 6 X 100 MM, N° 6 X 180 MM) 

N° 1 CENTERING KIT (2 RINGS - 6 BOSSES - 6 SCREWS M10x60 mm)

N°6 THREADED BARS M10x250 MM FOR THE CENTERING KIT 

N° 5 CARBIDE INSERTS
N° 1 TOOL-HOLDER S10Cx50 mm (COMPLETE WITH WRENCH AND TORX SCREW)
N° 1 TOOL-HOLDER S12Cx80 mm (COMPLETE WITH WRENCH AND TORX SCREW)
N° 4 TOOL-HOLDER EXTENSIONS (Ø 90 MM + Ø 150 MM + Ø 230 MM + extension KNUX type lgth 100 MM),
N° 1 SMALL HOOK ø 35mm (device for regulating cutting depth of tool holder)
N° 1 MICROSPAND (MODULAR DEVICE USED FOR INTERNAL MEASUREMENTS)
N°3 MICROSPAND EXTENSIONS (n° 1) 100 MM + (N° 2 ) 50 MM 
N°1 COMPARATOR 1/100
N°1 COMPARATOR  EXTENSION
N°2 COMPARATOR HOLDER 8/8 – 10/8
N°1 WELDING TORCH CABLE WITH EUR-FITTING  
N°1 TELESCOPIC WELDING TORCH SHAFT Ø 40 MM Tot. Lgth. 1500 mm
N° 4 TORCH HEADS FOR INTERNAL OVERLAY WELDING C/W WELDING WIRE NOZZLES AND GAS DIFFUSER (B 125 MM x C 90 MM x G 180 MM x M 70 MM)

N° 1 TORCH HEAD FOR EXTERNAL OVERLAY WELDING C/W WELDING WIRE NOZZLES AND GAS DIFFUSER (A 320 MM)

N° 3 TORCH HEAD EXTENSIONS (D 55 MM x E 45 MM x H 135 MM)

N°1 LATHED WELDING WIRE NOZZLE Ø 0,8 MM

N° 2 SHORT WELDING WIRE NOZZLE Ø 0.8 MM – 1 MM 

N° 2 LONG WELDING WIRE NOZZLE Ø 0.8 MM – 1 MM

WRENCHES

OPERATION MANUAL

N° 1 TROLLEY (for containing all the standard kit)
 

Equipment upon Request

KIT  
KIT ø 20 mm For boring starting from Ø 22 mm up to Ø 45 mm
Composed of:
·      N° 2 connectable tool-holder shafts ø 20 mm length. 1000 mm + 1000 mm: Tot. Usable lgth. 1950 mm
·      N° 3 adapting bushings ø40xø20x80 mm
·      N° 1 adapting bushings ø40xø20x90 mm
·      N° 1 adapting bushings ø40xø20x150 mm
·      Centering kit composed of:(- N° 2 rings ø 20 mm- - N° 6 bosses M10- - N° 6 screws M10x60 mm
·      N° 1 tool holder S08 (COMPLETE WITH WRENCH AND TORX SCREW)
·      N° 1 comparator holder 8/8
·      N° 1 hexagonal wrench 3 mm
KIT ø 30 mm For boring starting from Ø 32 mm up to Ø 600 mm
Composed of:
·      N° 2 connectable tool-holder shafts ø 30 mm length. 1000 mm + 1000 mm : Tot. Usable lgth. 1950 mm
·      N° 3 adapting bushings ø40xø30x80 mm
·      N° 1 adapting bushing ø40xø30x90 mm
·      N° 1 adapting bushing ø40xø30x150 mm
·      Centering kit composed of:(- N° 2 rings ø 30 mm-- N° 6 bosses M10-- N° 6 screws M10x60 mm
·      N° 1 tool holder S10C 33 mm
KIT 2000 ø 40 mm For facing bosses, creating circlip grooves, external machining from Ø 45 mm up to Ø 400 mm
Composed of:
·      N° 1 gear box
·      N° 3 brackets 30x25x270 mm
·      N° 3 brackets 30x30x305 mm
·      N° 1 fixed wrench 19

Upon request we can supply personalized kits for specific
machining or application

 

CERTIFIED TEST – STEEL C45
 
DIAMETER

mm

Ø 100

Ø 300

CUTTING DEPTH

mm

5 in the radius
10 in the diameter

3 in the radius
6 in the diameter

FEED SPEED

mm/min.

20

8

 

Control Panel

An electronic circuit has been inserted to guarantee a major safety in operation and to safeguard the rotation motor from excessive strain in case of an incorrect setup of the parameters, as well as to compensate possible critical points in machining. It automatically and proportionally reduces the feeding speed to reach the maximum strain point of the rotation motor, in order to dynamically reduce the load of the work, without passing the stop point for protection.

Thanks to the led bar called STP, it is possible to constantly monitor the motor’s work load, so to be able to optimize the choice of the parameters (rotation speed and feed speed),  based on the hardness of the material, the type of tool being used, to the machining diameter and to routing diameter of the tool. Furthermore, the bar signals in advance the alarm condition and the subsequent shut down of the control panel, flashing until the working conditions are restored.




 

The technical characteristics include:
AC 110  ~ 220  50 / 60 HZ WITH AUTOSELECTION OF MAINS VOLTAGE, WITHOUT THE USE OF TRANSFORMERS OR INVERTERS; ELIMINATING ELECTROMAGNETIC INTERFERENCES
ESPS ® TORQUE ELECTRONIC RUNNING OF THE TWO MOTORS WITH ELECTROMECHANIC SYNCHRONIZATION
DISPLAY FOR SPEED OF ROTATION REVOLUTIONS
ACOUSTIC WARNING WITH DISPLAY WITH FIGURED SIGNALS OF POSSIBLE FAULTS DURING THE RUNNING OF THE ROTATION  MOTOR
DISPLAY FOR SPEED OF FEEDING REVOLUTIONS
ACOUSTIC WARNING WITH DISPLAY WITH FIGURED SIGNALS OF POSSIBLE FAULTS DURING THE RUNNING OF THE FEEDING  MOTOR
MAIN SWITCH
EMERGENCY SWITCH
INVERTER DX/SX FOR FEEDING
INVERTER DX/SX FOR ROTATION
POTENTIOMETER FOR ROTATION REGULATION
POTENTIOMETER FOR FEEDING REGULATION
SWITCH FOR RAPID TRANSLATION OF THE SHAFT
 

 

 

 




 

Are you trying to inquire about a part or check availability of a product or a solution service?
Please either call / WhatsApp (60) 19 333 9484  at or email us at wso@assurich.com.my or submit an enquiry form online.

 

 

 

A MEDIA CENTURY CLIENT

© ASSURICH INDUSTRIES (M) SDN. BHD. (0181843P)    Home     Sitemap & Search     Contac Us