BMT 1760LMV

 

BMT 1740LM (LMV)/ 1760LM (LMV)/ 2040LM (LMV)/ 2060LM (LMV)

SPECIFICATION :  MODEL BMT 1740LM BMT 1760LM BMT 2040LM BMT2060LM BMT 1740LMV BMT 1760LMV BMT 2040LMV BMT2060LMV  CAPACITY  HEIGHT OF CENTERS 216mm 254mm 216mm 254mm  SWING OVER BED Ø435mm Ø508mm Ø435mm Ø508mm  SWING IN GAP Ø622mm Ø698mm Ø622mm Ø698mm  SWING OVER CROSS SLIDE Ø277mm Ø353mm Ø277mm Ø353mm  DISTANCE BETWEEN CENTERS 1000mm 1500mm  WIDTH OF BED 305mm  GAP WIDTH IN FRONT OF  FACEPLATE 195 mm  HEADSTOCK & MAIN SPINDLE  SPINDLE NOSE, INTERNAL TAPER D1-6, Ø85mm Taper 1/19.18  SPINDLE CENTER SLEEVE Ø85mm Taper 1/19.18 x M.T.NO.5  SPINDLE BORE Ø80mm  SPINDLE SPEED GEAR STEPS 12 steps 3 steps RANGE 36~1800RPM   A: 36 50 70 105 B: 130 180 250 380 C: 620 900 1200 1800   Infinitely variabl   L: 30~125RPM M: 125~450RPM H: 450~2200RPM  CARRIAGE  LENGTH ON BED/ WIDTH OF   CARRIAGE 440mm (15.75") / 447mm (15.12")  CROSS SLIDE TRAVEL 235mm 272 mm 235 mm 272 mm  TOP SLIDE TRAVEL 160mm  THREADS & FEEDS  WHITWORTH THREADS  (KINDS/ RANGE) 45 kinds / 2~72 TPI  METRIC THREADS (KINDS/ RANGE) 39 kinds / 0.2~14mm  D.P. THREADS (KINDS/ RANGE) 21 kinds / 8~44D.P.  M.P. THREADS (KINDS/ RANGE) 18 kinds / 0.3~3.5M.P.  LONGITUDINAL FEEDS 0.04~1.0mm (0.0015"~0.04")  CROSS FEEDS 0.02~0.5mm (0.00075"~0.02")  TAILSTOCK  QUILL DIAMETER Ø59mm  QUILL TRAVEL 127mm  TAPER OF CENTER M.T.4  MOTOR  MAIN SPINDLE 7.5HP AC 5.5kw (7.5HP), Inverter  FORCED LUBRICATION FOR H.D.  - 1/4HP  COOLANT PUMP 1/8HP  MEASUREMENT  NET WEIGHT (kgs) 1700 1850 1750 1900 1700 1850 1750 1900  GROSS WEIGHT (kgs) 2000 2150 2050 2200 2000 2150 2050 2200  PACKING SIZE L 2400mm 2900mm W x H 1120 x 1745mm *The above specifications are subject to change without prior notice.